產品介紹
Product specification
|
2.1 Product parameters
|
|||
|
S/N |
Performance parameters |
Parameter |
Note |
|
1 |
Input voltage |
AC100~240V 50/60Hz |
|
|
2 |
Input frequency |
|
|
|
3 |
Control power |
10A version 800W (resistive) 300W (LED) |
The last letter of the model A is 10A and B is 16A. |
|
16A version 1500W (resistivity) 500W (LED) |
|||
|
4 |
Standby power consumption |
<0.4W |
Model K 10R |
|
<0.7W RF447.9MHz |
Other models |
||
|
5 |
Communication frequency |
KF10RA/KF10RB |
|
|
|
|
||
|
|
|||
|
|
|
||
|
|
|||
|
6 |
Control distance |
20m [indoor ]50M[outdoor ] |
RF |
|
7 |
Indicator light |
Red light indicates pairing and code clearing, blue light indicates pairing network |
|
|
9 |
Mode of use |
Paired with DFM kinetic switch |
|
|
10 |
Shell material |
PC+ABS fire rating V0 |
|
|
11 |
Product size L*W*H |
|
|
| 12 |
Product weight
|
||
| 13 |
Packing size L * W * H
|
||
| 14 |
Outer box size L * W * H
|
||
| 15 |
Outer box weight G. W)
|
Single Pack
|
|
| 16 |
Certification
|
CE/ROHS/UKCA
|
|
| 17 |
Product color
|
White
|
|
|
2.2 Product Features
|
|||
|
S/N |
Function |
Description |
Note |
|
1 |
Kinetic switch control |
Paired with kinetic switch, single control and multi- control can be easily realized. |
K10R |
|
2 |
Kinetic switch remotely activates pairing mode |
Press the paired kinetic energy switch continuously for 8 times (within 6 seconds) to turn on the pairing mode. |
|
|
3 |
Remote control of mobile phone |
Under the condition that the mobile phone and the controller are connected to the Internet, the intelligent controller can be remotely controlled on / off in the network environment through the mobile phone APP. |
Intelligent controller (KF10Z/KF10M/KF1 0X works better with gateway) |
|
4 |
Local control of mobile phone |
In the case that neither the phone nor the controller is connected to the Internet, it can also be tumed on / off through Bluetooth or gateway and through the mobile phone APp. |
|
|
5 |
Support third- party access for voice control |
Access Alexa / Google Home/ IF TTT/ Tmall genie / Xiaodu etc., the extended functions such as voice control can be realized. |
|
|
6 |
APP activates pairing mode |
Under normal networking conditions, click on the key 8 times (within 6 seconds) in APP |
|
|
7 |
Timing function |
Mobile phone APP with timing control switch function (week repetition can be set) |
|
|
8 |
Electricity statist ics |
None |
|
|
9 |
Online upgrade |
When a new version of APP comes out, you can upgrade online in APP to add more features. |
|
|
10 |
Intelligent sharing |
You can share friends. |
|
|
11 |
Scene mode |
Support scene settings, such as home mode, leave home mode and other custom modes |
|
|
2.3 Environment |
||
|
Status |
Temperature ℃ |
Humidity, R.H. |
|
Work |
-20~50 |
<80% |
|
Storage |
-40~80 |
<80% |
Operating steps
3.1 Installation method
3.2 Fixed mode
① Use the double-sided adhesive included in the package to stick to the clean surface
② Use self-tapping screws to lock the expansion tube
3.3 Configure kinetic switch
① The receiver connects the load and connects to the AC100-240V power and presses the key for 3-4 seconds until the indicator flashes (2 flashes per second)
② Press the wireless kinetic energy switch to be paired
③ When the receiver needs to add switches, repeat the above action, and the receiver can store up to 10 switch pairing information.
④ One key, two keys, three keys and four keys are matched in the same way.
3.4 One-button pairing network
① Please connect the controller to the power supply and wait for the blue light to flash (twice per second).
② Connect your phone to WiFi and confirm its success.
③ Open APP, click on the top right corner of the equipment list to add an icon, select "socket" to enter the configuration device interface.
④ Click "Please confirm that the indicator light is flashing", enter the password of the WIFI connected to the current phone, and click "OK".
⑤ Wait for the configuration, and click "finish" after the configuration will jump to the functional interface of the controller.
3.5 AP pairing network
AP configuration is a way to facilitate configuration. If one-button pairing network fails, you can use AP configuration. The methods are as follows:
① Press the controller function key for 10 to12s, and the indicator light will enter the state of slow flashing (on 2 seconds and off 2 seconds).
② Open TUYA APP, click on the top right corner of the device list to add an icon, select "switch" to enter the configuration device interface, and click "compatibility mode" in the upper right corner to enter the AP configuration interface.
③ Click "Please confirm that the indicator is flashing slowly", enter the password of the WIFI to which the phone is currently connected, and click "Confirm".
④ Click "go to connect", which will jump to the WIFI list interface, select Smart Wireless Switch K10 and click "Connect".
⑤ Click the return button on the phone, wait for the configuration, and click "finish" after the configuration will jump to the functional interface of the controller.
Warnings and precautions
① The installation of the receiver or switch should be avoided in the metal-wrapped area. Such a place leads to signal shielding and functional failure.
② The receiver should be installed in a dry place to use;
③ Keep it out of reach of children.